Content - CrazyMill

CrazyMill

The CrazyMill range meets the highest standards of chamfering and deburring. Whether front-side or back-side chamfering or even the deburring of complex shapes is concerned, the four differently designed milling tools meet the strictest requirements:

  • CrazyMill Frontchamfer

    Chamfering in smallest dimensions
    CrazyMill Frontchamfer is suitable for machining the smallest work-pieces and can reach practically all angles and corners. The high number of teeth - 4 to 6 depending on diameter - allows high feeds. The positive cutting geometry guarantees excellent surface quality.

    • Carbide alloy
    • All tools are coated
    • Diameters from 1 to 6 mm (.04" - .24")
    • Chamfer of 90°
    • 4 to 6 teeth
    • Suitable for all materials
  • CrazyMill Backchamfer

    Chamfering hard-to-reach holes or edges on the back side
    No work piece turnover and re-clamping is necessary to machine hard-to-reach holes or edges on the back-side of a work-piece. CrazyMill Backchamfer allows miniature machining, starting from holes or slots as small as 0.4 mm (.016").

  • CrazyMill Doublechamfer

    One clamping for front and back side chamfering
    With a single tool front and back side chamfering of edges and hard-to-reach spots: CrazyMill Doublechamfer allows it also in a smallest diameter range, for diameter from 1 mm (.039").

  • CrazyMill Radiuschamfer

    Universal Chamfering
    CrazyMill Radiuschamfer is a universal chamfering tool due to its large sphere of action of 300°. It is thus ideal for front-side and back-side deburring of holes and slots as well as for all kinds of inside and outside contours and intersections of drillings and millings.

  • Brochures
  • Video