Mikron sees significant increase in order intake
Mikron sees significant increase in order intake
Biel, March 12, 2018, 7.00 a.m. – As expected, the second half of the year proved much better for the Mikron Group than the first. This is reflected in all three key indicators: order intake, sales and EBIT. The fact that the expectations published mid-year could nevertheless not be met is due to orders for a number of large customer projects coming in later than hoped. Over the year as a whole, order intake for Mikron manufacturing and automation systems was very volatile, resulting in an uneven distribution of production capacities. With incoming orders totalling CHF 278.9 million (previous year: CHF 243.6 million, +15%), the Group posted total annual sales of CHF 248.5 million (previous year: CHF 256.0 million, -3%) and EBIT of CHF 2.8 million (previous year: CHF 4.1 million, -32%). The innovation initiative launched in 2016 is on track. For 2018 the Group expects 10 to 20% growth in sales and, as a consequence, an improvement in EBIT.
In 2017, the general economic environment was stable overall, and demand for larger investment projects also picked up in the second half of the year. With Mikron customers’ production systems running at high capacity utilization levels, demand for tools and Mikron’s range of services was good. Numerous customers ordered retrofits for existing systems to be able to benefit from advances made in digitalization in the context of Industry 4.0 and to increase the productivity of their machines. With orders for a number of large customer projects coming in later than hoped, the expectations published mid-year could not be fully met.
In the 2017 financial year, the Mikron Group saw 15% year-on-year growth in incoming orders to CHF 278.9 million. Up toward the end of the third quarter, the intake of orders for Mikron Machining’s systems business was very volatile and generally too low. Thanks to the sound economic environment above all in the fourth quarter, the business segment posted order intake of CHF 152.9 million, representing an overall increase of 33% compared with the low prior-year figure. Mikron Automation reported a 2% year-on-year decrease in order intake to CHF 126.0 million in 2017, due primarily to customer orders being postponed until the new year.
Net sales and order backlog
With annual sales of CHF 248.5 million, the Mikron Group was not quite able to reach the previous year’s result (CHF 256.0 million, -3%). While Mikron Machining succeeded in increasing sales by 7% on the back of strong tool and service business, the Automation business segment faced a decrease of 11%. After a very weak first half, Mikron Automation reported second-half sales in line with the corresponding year-back figure. At CHF 157.2 million, the Mikron Group’s order backlog at the end of 2017 was 28% higher than the prior-year figure.
With EBIT at CHF 2.8 million in 2017, the Mikron Group fell short of the previous year’s result of CHF 4.1 million. While the Machining business segment witnessed an improvement in profitability, EBIT remains negative at CHF -1.6 million (previous year: CHF -5.2 million). The loss is mainly due to the low level of sales in the machinery business, especially in the first half of the year. Innovation project costs also put profitability under pressure. Factoring out this innovation spend, Mikron Machining would have achieved a positive EBIT margin. Following the good result recorded in 2016, Mikron Automation faced a significant decline in EBIT, from CHF 7.5 million to CHF 3.1 million in the 2017 financial year. Taking into account the 11% decrease in sales, the business segment still reported a solid EBIT margin of 2.5%.
In the year under review, the Mikron Group posted a net result of CHF 1.2 million (previous year: CHF 2.3 million) or CHF 0.07 per share (previous year: CHF 0.14). The Board of Directors will be proposing to the Annual General Meeting an unchanged distribution from capital reserves of CHF 0.05 per share.
The Mikron Group innovation initiative launched in 2016 is on track. In 2017, Mikron invested a total of CHF 8.8 million (previous year: CHF 7.1 million) in the development and expansion of new products and product platforms. This is equivalent to 3.5% of sales.
The Mikron Group is not anticipating any fundamental changes in market conditions in 2018. Customer system capacity utilization rates are expected to remain high, which will continue to impact positively on the service and tool business. The tool business is looking to tap into further encouraging development opportunities on the US market. This is also true for Mikron Automation, once the uncertainties in the healthcare system have been resolved. The business segment should also be able to profit from the trend toward self-medication and from the fact that people are living increasingly longer. New market opportunities will present themselves to Mikron Machining in 2018 with capacity utilization still high in the automotive industry.
Given that orders in hand are relatively high – though they are unevenly distributed among the various production locations – Mikron expects 10 to 20% growth in sales for 2018 and thus an improvement in EBIT.
Key figures for the Mikron Group
Number of employees
Profit for the year
Operating cash flow
Balance sheet total
*except number of employees and