Mikron Multistar

The versatile machining system for small precision parts

The Multistar transfer machine is well known for its wide range of applications. Parts for injection systems and gas burners, connectors for the electronics and electrical industry as well as components in the area of surgery, communications and audio-video are some of many ideal Multistar workpieces.

Multistar machines parts made from materials such as steel, non-ferrous metals or aluminium, in the diameter range from 0.4 to 35 mm with maximum lengths of up to 65 mm.

  • High-precision rotary transfer machine with 24 stations
  • Full CNC or mechanically actuated versions
  • Highly accurate manufacturing and repeatability


When it comes to high-volume production, Multistar is the best partner!

  • Available with from one to four simultaneous cycles, depending on part complexity and required volume
  • Capacity of up to 150 parts/min in single-cycle operation and up to 600 parts/min in four-cycle mode


More about Mikron Multistar

The best of productivity with full CNC flexibility

The ideal solution for cost-effective batch production of a few hundred to many thousand parts from materials such as alloy steel, brass, titanium or aluminium – with maximum dimensions of Ø 35 mm and maximum lengths of up to 65 mm.
Up to 44 machining units operating simultaneously at 24 stations, assuring a very high output rate.

  • 100% programmable and 100% versatile – all axes electronically controlled for fast changeover
  • Capacity of up to 30 pieces/minute
  • High precision


Contact us

To be contacted by one of our staff members please fill in the following form:

A top performer!

What makes the Multistar CX-24 so special? Its unbeatable precise performance and speed. The Multistar CX-24 controls spindle movements with linear curves. The quickly interchangeable control curves provide processing flexibility, and 24 additional intermediate stations enable measuring, turning over of the workpiece – also in different shape, monitoring and cleaning procedures in the processing cycle.

Advantages at a glance:

  • Precise serial production of part families and demanding workpieces
  • ± 2.5 μm table index accuracy
  • Up to 44 machining units operating simultaneously at 24 stations, assuring a very high output rate



Contact us

To be contacted by one of our staff members please fill in the following form:

That way you can quadruplicate your productivity

The Multistar LX-24 with 24 work stations and up to 44 working spindles ensures a smooth mass production. With the Multistar LX-24, parts can be machined from below and above or from the side. Other additional features are the 24 intermediate stations, which allow measurement, monitoring and cleaning procedures during the same run.

A highly unique system! Up to 600 simple workpieces can be produced per minute. Separating the work fields doubles, triples or quadruples the production rate at the same high processing speed. This same parallel concept enables complete production of different workpieces is possible within a single run.

Contact us

To be contacted by one of our staff members please fill in the following form: