 |
|
| Tuesday, May 4, 2010 |
|
|
|
| One cutting tool – for different deburring operations |
| Agno, Mikron Tool completes his program of miniature deburring tools with a new, ball-shaped milling cutter ‚MiquMill Radiuschamfer’. Due to its enormous 300° cutting range it is really universal and can be used wherever difficult deburring operations have to be performed. |
|
| MiquMill Radiuschamfer is available with ball diameters starting from 1mm and due to an extra long neck, this new tool reaches also hidden angles and edges. The positive cutting geometry allows a sharp cut and thus a perfect deburring without forming of secondary burrs. It easily removes ductile, flexible burrs too and can be used for all kind of metals.
These features make it a ‘jack-of-all-trades’ because it can be adopted not only for front and back chamfering, but also for various inner and outer contour machining operations, for intersections of bores and milled shapes.
The standard executions with a ball diameter from 1 mm to 6 mm and a usable length of 4 x d are available from stock. Also custom designed executions with project specific dimensions are available. Every user will find a suitable cutting tool for his particular job in this three-pack line. MiquMill Frontchamfer for chamfering and deburring, MiquMill Backchamfer for back side deburring and MiquMill Radiuschamfer for the deburring of hard-to-reach spots and complex shapes. The feature in common? Great for small dimensions; high feeds; perfect surface quality. |
|
|
